Welcome to visit Ruitian Wire&Cable CO.,LTD. Official website !
+86-13833119023 janey@hbrtcable.com
Low Voltage Power Cable
Home - Products - Low Voltage Power Cable

0.6/1kv Aluminum XLPE Power Cable With Steel Tape Armoured

The bending radius of cable is recommended as following:

For single core cable: not less than 15 times of the diameter of cable

For multi-core cable: not less than 12 times of the diameter of cable

When the armoured single core cable used for Alternative Current(AC) system, the armoured material should be non-magnetic.

MESSAGE

Aluminum XLPE Power Cable Scope

This product is suitable for frequency 0.6/1KV and below rated voltage distribution networks or industrial installations in fixed installations.

Operating Characteristics

Rated voltage: 0.6/1(1.2)kv(Low Voltage Power Cable)

Max. permissible continuous operating temperature of conductor: 90 °C

Max. temperature of conductor during short-circuit (5s max. duration) shall not exceed: 250 °C

The ambient temperature under installation should not be lower than: 0 °C

Description

Type Description No. of cores Nominal cross
section of conductor
YJLV22 Aluminium conductor
XLPE insulation
Steel Tape Armoured
PVC outer sheath Power Cable
1, 2, 3, 4, 3+1,
5, 4+1, 3+2
1.5~800mm²
YJLV23 Aluminium conductor
XLPE insulation
Steel Tape Armoured
PE outer sheath Power Cable
1, 2, 3, 4, 3+1,
5, 4+1, 3+2
1.5~800mm²
ZA-YJLV22
ZB-YJLV22
ZC-YJLV22
Aluminium conductor
XLPE insulation
Steel Tape Armoured flame-retardant Power Cable
1, 2, 3, 4, 3+1,
5, 4+1, 3+2
1.5~800mm²
WDZA-YJLY23
WDZB-YJLY23
WDZC-YJLY23
Aluminium conductor
XLPE insulation
Steel Tape Armoured Low Smoke Halogen Free or
Zero Halogen (LSHF or LSZH) flame-retardant Power Cable
1, 2, 3, 4, 3+1,
5, 4+1, 3+2
1.5~800mm²

The bending radius of cable is recommended as following

For single core cable: not less than 15 times of the diameter of cable

For multi-core cable: not less than 12 times of the diameter of cable

When the armoured single core cable used for Alternative Current(AC) system, the armoured material should be non-magnetic.

Manufacturing Standards

The product according to GB/T12706 " rated voltage 35KV and below copper, aluminum plastic insulated power cables " standards, while also based on user needs by the International Electrotechnical Commission standard IEC, British Standards , the German standards and U.S. standards.

Categories

HOT PRODUCT

TOP
Online Service×